Economical option to the traditional prop puller. Simply screw it on in place of your prop nut and give it a knock with a hammer. It will jolt the prop loose from the shaft. Then, unscrew the knocker and pull off the prop. Fits 1" and 1-1/8" shafts (not for 2014 & up Nautique G-boats).
1-1/16" Socket with wrench flats. Needed when there is not enough room to get a regular socket/ratchet in between the couplers.
* Example Mastercraft's (with ARE shaft) with powerslot transmission and some Supra's with PCM 1.23 transmission.
This nut is included with the ARE drive shaft system. It screws into the drive shaft coupler pressing against the shaft and pops it off. It will only work with the ARE system that has internal threads in the coupler.